700r4 transmission hook up


**Before installation, make sure you have the correct dipstick configuration for your application. TCI® offers a complete line of dipsticks for most applications.

Now to the outside wiring.  I recommend running an accessory hot wire (hot only when the key is on), through a normally open brake cancel switch.  This switch will allow current flow, only when it is depressed.  The brake pedal depresses the switch, normally, and releases the switch when the brake is applied.  This switch works exactly opposite the brake light switch, whereas the brake light switch allows current, only when the brake pedal is depressed, the cancel switch interrupts current when the brake pedal is depressed, thereby unlocking the torque converter clutch, such as in a panic stop.  The cancel switch is mounted on a bracket under the dash.  The brake pedal arm makes contact with the switch when it is all the way out.  Just so you will know, most of the time the brake cancel switch is also a cancel switch for the cruise control, if you have cruise.  This is why it is called a cancel switch, it cancels power when the pedal is pressed.  You need to make sure that when the brake pedal is all the way out there is power going through, press the pedal and the power is interrupted.


700r4 transmission hook up

700r4 transmission hook up